Skip to content
Country/region
Search
Cart

Step by step to install the Janet 2.0 pilates reformer with images

If you have received the Janet 2.0 reformer or Nano Pro reformer via UPS in an unassembled state, there's no need to worry. We have prepared a comprehensive, step-by-step installation guide that provides clear instructions, allowing you to easily assemble the reformer in just 30 minutes.

Step 1: Check the parts. 

 

Step 2: Install the frame 

To install the frame, allocate these 2 connectors  

Make sure they are in this position 

Allocate the 4 screws on each side of the frames parts 

Use Allen key to remove the screws 

Attach the connectors as the image below.

Repeat this for all the 4 sides. 

Step 3: Install the legs. 

Allocate the 6 legs and 6 long screws. 

Insert the screw from the top hole. 

Allocate the legs holes from the frame 

Use insert the legs into the frame holes as the image below. 

Make sure it is secure and tight enough 

Repeat for the whole 6 legs. 

Step 4: Install the foot bar. 

First allocate the long padded pole and the two foot bar handles as below  

Then remove the screws from the foot bar pole 

Use them to attach the handles 

Repeat for two sides. 

 Step 5: Attach the foot-bar to the frame 

 

Repeat for 2 sides. 

Step 6: Install the wheels  

Find the wheels screws in the edges of the frames 

Remove the screws

Use them to attach the wheels as the below image  

Repeat that for the 4 sides. 

Step 7: Install the middle pole. 

Allocate the shorter pole 

Remove the screws 

And attach it to the frames connectors as the below image 

 

Step 8: Install the shoulder rest 

Repeat for 2 sides 

Step 9: Install the pulley tower 

Allocate the tower holes 

Insert the tower poles 

Use the below screws to secure it 

Repeat for both sides