Congratulations on getting the Nano Elite Plus! It’s one of our premium, top-performing reformers. The great news is that installation is quick and simple—just a few steps and takes only 10–15 minutes max.
-
Step 1:Install the raisers
The star nut is inserted into the bar and then into hollow at the end of the bed.you can adjust the rope at different height through the ropeway
-
Step 2: Install the foot strap and the foot pads
Foot strap
Pads
Please put the stainless steel face into the slot and then tighten the nut .you can put in a hand step or a soft step depending on the needs of the exercise.
-
Step 3: Installing the Jumpboard
First, hand lever to adjust to the third gear,This is very important then the stainless steel face toward yourself, vertically down, and then fixed with nuts. Use the jumpboard must have a hand bar as a support.
-
Step 4:Installing the shoulder rests
The shoulder rest has two holes to adjust. You can adjust the position according to your own needs. Turn the shoulder rest against the I8O degree Angle and repeat the previous operation ,you can get the different width.Fasten the nut under the shoulder rest and insert the rope holder into the hole.
-
Step 5:Installing the rope system
-
Step 6:Working with springs
The reformer bed is fitted with 6 springs in 3 strengths to offer a wide range of possible resistances. red=strongX2,blue=mediumX2,yellow=light X2
the springs can be used in any combination, although when using the reformer for asymmetric exercises.
In addition, the spring has three rows of hangers, which you can hang in any row to achieve the effect of your practice.
-
Step 7: Adjust the handle bar
Warning:In the process of use, if you find any screws loose, please be sure to fix the screws again.
-
Step 8: Moving your reformer
This Reformer bed has two wheels, which is made for easy handling. When you need to move it, please lift the tail and move it easily against the wheel.
